HAIER PL3710398P-2P Laptop Battery Replacement (10000mAh 37Wh 3.7V)

Default Profile Picture
Posted by anna201 from the Business category at 18 Feb 2021 03:49:04 am.
Thumbs up or down
Share this page:

Strong endurance, power saver, use good cells to do laptop battery - HAIER PL3710398P-2P Excellent quality Battery Replacement. This HAIER PL3710398P-2P battery is compatible with the Haier VL-40100100-2s ELL1401-BK N14 NB44 BN46. We provide a 30 day money back guarantee if you are not completely satisfied.
PL3710398P-2P

  • Brand: HAIER Laptop Battery
  • Replaceable with the following models: PL3710398P-2P
  • Rechargeable battery type : Li-ion
  • Color: black
  • Current : 10000mAh 37Wh
  • Voltage : 3.7V
  • Capacity : 37Wh
  • Encoding : ECN12214
  • Supported models : PL3710398P-2P 1ICP4/104/98-2
  • HAIER PL3710398P-2P compatible Laptop Battery model:
    Haier VL-40100100-2s ELL1401-BK N14 NB44 BN46
    interface: 4-lines
    Not compatible with 7-lines and 5-lines.
Online store: HAIER Battery
How to care for your HAIER PL3710398P-2P Laptop Battery?

This is the Replacement HAIER PL3710398P-2P Battery, You can extend the life of your laptop battery significantly through the proper care and handling of your battery.


1. Any new PL3710398P-2P battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave laptops plugged in after they have been turned off so that the battery has a full charge the next time you use your laptop. It is probably fully charged within 5 hours.

2. A brand new PL3710398P-2P notebook battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.

3. Run on battery power without the AC adapter cord at least once a week to keep the PL3710398P-2P battery cells active and at their peak potential. When your laptop is plugged into the power adapter the battery goes to 'standby mode' while your laptop runs directly on electricity from the wall outlet.

4. Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.

5. If your PL3710398P-2P battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.

6. Don't run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the PL3710398P-2P battery even after 10 minutes will not reduce the battery's life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in laptops, even the earliest models.

7. Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively 'kill' your PL3710398P-2P battery.
New Products
0 Comments
[14]
Beauty
[2694]
Business
[63]
Health
[4]
Law
[1]
Men
[35]
Travel
Blog Tags