Reveal the hidden function of the hot stamping foil slitting machine, and solve the production problem in one move!
Posted by delishslitter
from the Business category at
23 May 2025 02:04:49 am.
Share this page: 
In addition to the basic slitting function, the hot stamping foil slitting machine usually has the following hidden functions:
1. Automatic Tension Control System - Adjusts the tension during the slitting process to prevent the material from stretching or wrinkling
2. Intelligent Web Guiding Device - Automatically detects and corrects material misalignment
3. Multi-segment slitting mode - support slitting different width specifications at the same time
4. Automatic recycling of waste edges - reduce the frequency of manual cleaning
Solutions to production challenges
Common problem 1: Slitting edge burrs
Solution: Enable the "Precision Sharpening" mode, adjust the blade angle to 15-20 degrees, and reduce the slitting speed by 30%
Common problem 2: Wrinkling of the material
Solution: Activate the "Dynamic Tension Balance" function and set the front tension to be 5-10% higher than the rear tension
Common problem 3: The slitting size is unstable
Solution: Use the "Laser Positioning Calibration" function (press and hold the setting button for 3 seconds to enter the advanced menu)
Maintenance tips
Regular use of the machine's "self-diagnostic mode" (holding down the "start" and "stop" keys for 5 seconds at the same time) can detect potential problems before they occur and reduce downtime.
These hidden features can significantly improve productivity and product quality, and it is recommended that operators fully understand and utilize the full functionality of the equipment.
0 Comments