What material is the hot stamping film slitting machine suitable for?

Posted by delishslitter
from the Business category at
24 Jan 2025 01:14:17 am.
1. Paper: It is the most commonly used substrate in the hot stamping process, including coated paper, whiteboard paper, white cardboard, cloth paper, offset paper, etc. The paper with dense texture, high smoothness and high surface strength can obtain a good hot stamping effect, which fully reflects the luster of anodized aluminum. However, the hot stamping effect may not be ideal for paper with rough surface and loose paper, such as book paper and poor offset paper.
2. Plastics: Some plastic materials, such as PET, PVC, etc., are also suitable for hot stamping process. These materials usually have good surface smoothness and strength and are able to withstand the pressure and temperature of the hot stamping process.
3. Fabrics: such as cotton, synthetic fiber cloth, etc., can also be used as a substrate for the hot stamping process. However, it should be noted that the cloth may require additional fixing measures during the bronzing process to ensure its flatness and stability.
4. Metal: Some metal sheets or plates, such as aluminum foil, iron plate, etc., can also be used as a substrate for the hot stamping process under certain circumstances. However, due to the hardness and thermal conductivity of metal materials, parameters such as pressure and temperature may need to be adjusted during the hot stamping process.
5. Other materials: such as wood, cardboard, leather, etc., can also be foiled under specific conditions. These materials often need to be pre-treated, such as sanding, gluing, etc., to improve their surface smoothness and adhesion.
In general, the hot stamping film slitting machine is suitable for a variety of substrates, but it is necessary to select the appropriate parameters and operation methods according to the specific material characteristics and hot stamping process requirements. In practical application, it should be considered comprehensively according to the material, thickness, shape and required hot stamping effect of the substrate. At the same time, it is also necessary to pay attention to the selection of appropriate anodized aluminum materials and hot stamping process parameters to obtain the best hot stamping effect.
1 Comments
Comments
delish automation equipment