CCNP Enterprise Certification

Default Profile Picture
Posted by passyourcert from the Education category at 11 Jul 2022 09:40:23 am.
Thumbs up or down
Share this page:
Original Content Source:
For many years, candidates needed to pass the route, switch, and tshoot examinations in order to get the Cisco Certified Network Professional (CCNP) Routing and Switching certification. That's not the situation anymore. The CCNP Routing and Switching certification has been superseded with the CCNP Enterprise certification. Candidates only need to pass one core exam and one enterprise concentration test in order to obtain the CCNP Enterprise certification.

What Does a CCNP Do?
The CCNP Enterprise designation is one of the most prestigious in the IT industry. If you possess this qualification, employers will be able to tell that you are competent of building, installing, configuring, and troubleshooting complex enterprise networks. By obtaining the CCNP Enterprise certification, you can start working as a network engineer, systems engineer, support engineer, or network technician right away.

How Much Can You Make with a CCNP?
The CCNP has numerous typical job titles, as well as a wide range of factors like location and experience. A CCNP Enterprise can earn an average US annual salary of $50,000 to well over $100,000. With the CCNP Enterprise certification, you'll be eligible for a variety of jobs and have the possibility to make more money.

What is the Difference Between a CCNA and a CCNP?
One of the most well-known entry-level networking qualifications in the business is the Cisco CCNA certification, which is obtained through a single exam. The CCNA is a foundational exam that gives newcomers a solid understanding of how to operate IT equipment. A more demanding certification, the Cisco CCNP Enterprise, necessitates a deeper level of familiarity with and comprehension of the underlying technologies powering today's intricate networks. Additionally, you will need to pass two tests.

Can I do CCNP without CCNA?
Absolutely. There are no official prerequisites for the CCNP Enterprise exam, which is another notable shift to the new testing methodology. Although CCNA certification is no longer essential, candidates should still be well-versed in technology before sitting for the examinations.

Exams for CCNP Enterprise
To meet the requirements for the CCNP Enterprise certification, candidates must pass one of the six CCNP Enterprise concentration exams in addition to the mandatory core exam. These specialty tests concentrate on cutting-edge and sector-specific subjects like network architecture, SD-WAN, wireless, and automation. Additionally, every CCNP Enterprise test results in a separate Specialist certification, allowing you to be acknowledged for your achievements.

Required Core exam:
Examining your understanding of enterprise infrastructure, including dual-stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation, is required for the Implementing and Operating Cisco Enterprise Network Core Technologies 350-401 (ENCOR) certification. The Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification may be obtained by passing this exam.

Concentration exams (choose one):
Exam 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI). This exam measures your ability to troubleshoot and implement advanced routing technologies and services such as EIGRP, BGP and MPLS. This exam is required to earn the Cisco Certified Specialist Enterprise Advanced Infrastructure Implementation certification.

Exam 300-415 (Implementing Cisco SDWAN Solutions 300-415) tests your knowledge about Cisco's SDWAN solution. This includes SD-WAN architecture, controller deployment and edge router deployment, security, multicast as well as management, operation, and management. After passing this exam, you'll be awarded the Cisco Certified Specialist – Enterprise SD-WAN implementation certification

Designing Cisco Enterprise Networks 300 -420 (ENSLD), tests your knowledge in enterprise design. This includes advanced routing and addressing solutions, advanced enterprise campus networks and WAN. It also covers security services and software defined access (SDA). After passing this exam, you'll be awarded the Cisco Certified Specialist – Enterprise Design certification.

Designing Cisco Enterprise Wireless Networks 300-425 exam (ENWLSD), tests your knowledge about wireless network design. This includes site surveys, wireless infrastructure, mobility, and high availability. You will be awarded the Cisco Certified Specialist – Enterprise Wireless Design certificate after passing this exam.

The Implementing Cisco Enterprise WLAN Networks 300-430 exam (ENWLSI), tests your knowledge about wireless network implementation. This includes FlexConnect, QoS and advanced location services. Monitoring and device hardening are also included. This exam will give you the Cisco Certified Specialist- Enterprise Wireless Implementation certification.

The Automating Cisco Enterprise Solutions 300-435 exam (ENAUTO), tests your ability to implement enterprise-level automated solutions, including Python programming and controllers. You will be awarded the Cisco Certified DevNet Specialist- Enterprise Automation and Programmability certificate if you pass this exam.

CCNP Enterprise Exam Prep
The Cisco CCNA exam is a great way to prepare for CCNP certification. This exam, although not necessary, will greatly help you to gain a technical understanding of the topics covered in the Cisco Cisco CCNP. After you have a solid foundation, you can begin to understand the advanced topics covered by the Enterprise exams. This will be done using Passyourcert courses and Cisco technical books.

PassYourCert Courses
Passyourcert offers complete learning paths for many CCNP Enterprise Certifications. These courses will equip you with the knowledge and skills to pass the Cisco CCNP Enterprise ENCOR exam and other concentration exams.

Practice for the Exam
You can get hands-on experience using simulations, a work test bench, lab time purchases from lab providers, building your lab, or scheduling Cisco to cloud resource access through DevNet Sandbox. DevNet Sandboxes offer fully scripted and customizable environments that can be accessed almost immediately in the cloud. Some engineers have access to work test beds. This makes life easier and allows for practice within the working hour. Although home labs are a good option, they can be expensive and make it difficult to replicate complex networks. Cisco VIRL simulator runs the same operating system as physical routers and switches. It is an exceptional tool.

I was once told by someone that Cisco CCNP exams don't go away. Some exams are more difficult than others but they are well worth the effort. Preparing for a Cisco certification exam can be difficult and time-consuming. We must be able to configure the content and troubleshoot it to achieve our level of certification. You can give it your best shot once you're ready. You can always rework it and try again. Persistency, persistence, and a positive attitude are the keys to success in Cisco exams.

Original Content Source:
June 2023
Blog Tags